INSTALLATION INSTRUCTIONS AUDI A4, S4, QUATTRO (1999.5-2002) AUDI A6 QUATTRO (2000-2004)

Note: Please read the instructions before installing this Bracketron MOUNT PHONE. All instructions are written from the seat forward of the driver in the dashboard of the vehicle. Caution is advised when collecting or handling the plastic parts of a vehicle dashboard. WARNING: Unnecessary force or pressure can cause pieces to crack or break. Locate the four places on the face of the radio. Audi DIN Insert four tools in these four slots until you hear or feel a click or blocking tool. Note: There is a rubber seal that surrounds the radio between the radio and the button on the dashboard. This makes the radio for comfort in the cavity. To loosen the joint and allow the radio to slide more easily,
We recommend using a dashboard trim panel tool or a flathead screwdriver to wedge between the left and right of the radio and the dash pad. Gently wiggle the tool or screwdriver to loosen the little radio. Grab Four DIN tool and push the radio out of its socket just enough to allow access to two (2) 5 / 16 "hex bolts right on the radio. Remove the two bolts through 5 / 16" making and current driver. Caution: Do not disconnect the son for the radio. You need the radio code to reprogram! Place the Bezel Mount over the two holes and make sure the holes line up. Put the two factory bolts and tighten with a socket and driver. Re-install the radio in reverse order. Install any phone holder or Amps Bracketron compatible device your scope mounting. Your installation is complete.

Download INSTALLATION INSTRUCTIONS AUDI A4, S4, QUATTRO (1999.5-2002) AUDI A6 QUATTRO (2000-2004).Pdf